Quality custom alloy wheels supplier: At present, the performance test standards of wheel hub mainly include: Japanese JWL VIA standard; German TUV standard; American SAE Standard. German TUV standards are the most stringent, which is why European wheel brands are heavy. The following European BBS 19X8.5J cast wheel hub weighs 11.65KG, compared with other cheap cast wheel 19X8.5J hub weight is 10.68kg. Attached is the hub weight reference table, if you buy a particularly light hub , pay attention. Change HUB SAFETY FIRST!! Read extra details on alloy wheels wholesale.
The two piece wheel consists of two parts: the rim (Barrel), and the wheel width. It is possible to combine different rim widths and thicknesses on one hub, or to combine widths and offsets for more options. And the two spokes are interchangeable, so that when repairing and replacing, it is not necessary to replace the whole hub, but only the part, which is finally fastened with high-strength bolts. This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.
Changeable fashion styles are more suitable for the requirements of modern vehicles: The style is easy to change arbitrarily: using casting to make aluminum wheels, any spatial surface and shape can be made to match different models and meet the requirements of different users. The status of “green leaves lined with safflower” is becoming more and more prominent, and aluminum wheels have become the echo products of modern automobile fashion. It is not easy to hide dirt and dirt, does not produce rust, is easy to clean, and is widely loved by drivers.
Fuel vehicle: If you use fully synthetic engine oil, a small maintenance every 10,000 kilometers, a single cost of 600 dollar, then 100,000 kilometers need to be maintained 10 times, the total cost is 6,000 dollar, a major maintenance every 30,000 kilometers, a major maintenance Counting 1,000, 100,000 kilometers of maintenance 3 times, the cost is 3,000, so calculated, the total maintenance cost of 100,000 kilometers is 9,000 dollar.
The advantages of alloy wheels are light weight, high manufacturing precision, high strength, low inertial resistance, strong heat dissipation capacity, good visual effects, etc. The disadvantage is that the manufacturing process is complicated and the cost is high. The aluminum wheel hub is the product of “lightweight”, “high speed” and “modernization”, because it has many characteristics that are unmatched by steel wheels: Light weight and obvious energy-saving effect: It is well known that reducing the weight of the vehicle can save fuel, and the wheels located in the driving part with the lowest center of gravity of the vehicle are even more important to reflect the energy-saving effect of the vehicle.
Jiangjin science and technology is a global leading custom alloy wheels suppliers and alloy rims manufacturers. The experience is the best protection for our customer. Jiangjin science and technology was established in 1992. After 28 years of development, it becomes a stable supplier of many famous wheel brands worldwide. The capcity goes 1.5 million piece of wheels per year. Our main products include casting wheels, forged wheels, flow formed wheel. Discover additional info at https://www.jjjwheel.com/.